Skip to main content

Changes to Step #1

Edit by gatortpk

承認済みの編集 by Andrew Optimus Goldheart

Deleted
Added
Unchanged

Step Lines

[* black] Remove the following 3 screws:
[* red] Two 3 mm Phillips near the right speaker.
[* orange] One 6 mm Phillips threaded through a hole in a plastic finger above the subwoofer.
[* icon_reminder] Be careful not to over-tighten the screw above the subwoofer too tight or the plastic could crack.
[* icon_note] Santa Rosa and Penryn MacBooks do not have a c-channel. If you are disassembling either of these models, remove only the single 3 mm Phillips screw from the right speaker and skip step 26.
[* icon_note] Santa Rosa and Penryn MacBooks do not have a c-channel. If you are disassembling either of these models, remove only the single 3 mm Phillips screw from the right speaker and skip step 26.