Skip to main content

Changes to Step #1

Edit by John Ward

承認の保留中

Deleted
Added
Unchanged

Step Lines

[* icon_note] Note: Santa Rosa and Penryn MacBooks do not have a c-channel. If you are disassembling either of these models, remove only the one 3 mm Phillips screw from the right speaker and skip step 26.
[*
black] C-channel models; Remove the following 3 screws:
[* icon_note] Note: Santa Rosa and Penryn MacBooks do not have a c-channel. If you are disassembling either of these models, remove only the one 3 mm Phillips screw from the right speaker and skip step 26.
[*
black] C-channel models; Remove the following 3 screws:
[* red] Two 3 mm Phillips near the right speaker.
[* orange] One 6 mm Phillips threaded through a hole in a plastic finger above the subwoofer.
[* icon_reminder] Be careful not to over-tighten the screw above the subwoofer too tight or the plastic could crack.
[* icon_note] Santa Rosa and Penryn MacBooks do not have a c-channel. If you are disassembling either of these models, remove only the 3 mm Phillips screw from the right speaker and skip step 26.