メインコンテンツにスキップ

手順1に変更

Andrew Bookholtさんによる編集

承認の保留中

削除
追加
変更なし

手順ライン

[* black] Remove the following 3 screws:
[* red] Two 3 mm Phillips near the right speaker.
[* orange] One 6 mm Phillips threaded through a hole in a plastic finger above the subwoofer.
[* icon_reminder] Be careful not to over-tighten the screw above the subwoofer too tight or the plastic could crack.
[* icon_note] Santa Rosa and Penryn MacBooks do not have a C-Channel. If you are disassembling either of these models, remove only the 3 mm Phillips screw from the right speaker and skip step 26.

画像1

以前の画像はありません

追加