メインコンテンツにスキップ

手順2に変更

redactedさんによる編集

承認済みの編集 : redacted

変更なし

手順ライン

-[* red] After removing the bottom plate, you will have visibility of the logic board. Using a spudger, lift the small black latch holding the ribbon cable. Slide the ribbon cable loose from the logic board.
+[* red] After removing the bottom plate, you will have visibility of the logic board. Using a plastic opening tool, lift the small black latch holding the ribbon cable. Slide the ribbon cable loose from the logic board.