メインコンテンツにスキップ

手順5に変更

Arthur Shiさんによる編集

承認済みの編集 : Arthur Shi

変更なし

手順ライン

-[* black] Disconnect the black fan connector and two temperature sensor connectors from the logic board by pulling/prying them directly up. Don't try to slide the connector plugs out of their sockets, in the same plane as the logic board, since that may break them.
+[* black] Disconnect the black fan connector and two temperature sensor connectors from the logic board by pulling/prying them directly up.
+ [* icon_note] Don't try to slide the connector plugs out of their sockets, in the same plane as the logic board, since that may break them.
[* icon_note] If you have a MacBook Core 2 Duo Santa Rosa/Penryn/Early 2009, there is only one temperature sensor.
[* icon_reminder] The heat sink in early 2009 MacBooks may look slightly different.