メインコンテンツにスキップ

手順 7 への変更

- Justin Coganによって編集

承認済みの編集 : Justin Cogan

削除
追加
変更なし

手順ライン

[* black] This step is easier with two people. Carefully have one person lift the hood of the printer 2-3 inches above where it was resting.
[* yellowred] The second person will now remove the ribbon cables and wires attaching the motherboard (the only green PCB board) to the hood by gently pulling upward on them.
[* black] When all three cables are removed, lift the hood away from the printer and set it aside.
[* yellowred] The second person will now remove the ribbon cables and wires attaching the motherboard (the only green PCB board) to the hood by gently pulling upward on them.
[* black] When all three cables are removed, lift the hood away from the printer and set it aside.
[* black] When all three cables are removed, lift the hood away from the printer and set it aside.

画像2

古いバージョン

新しいバージョン