メインコンテンツにスキップ

手順 6 への変更

- Joseph Camilleriによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* black] Now remove the exposed screw that was covered by the power button face.
[* black] This screw is placed awkwardly, and the onlyawkwardly. The only way to releaseremove it with proper leverage is by holding a T-9 screwdriver head with a small deviceitem that can hold it parallel with the screw, and turning the screw slowly. Needle nose pliers can do this job.
[* black] This screw is placed awkwardly, and the onlyawkwardly. The only way to releaseremove it with proper leverage is by holding a T-9 screwdriver head with a small deviceitem that can hold it parallel with the screw, and turning the screw slowly. Needle nose pliers can do this job.
[* black] Do not try and torque the screw from an angle. This will ruin the screw's head, and make it even more difficult to remove the screw. Only remove it as already described.

画像1

以前の画像はありません

追加

画像2

以前の画像はありません

追加