メニュー

あなたの設定

私のワークベンチ

お持ちのデバイス用の修理ガイド、交換用パーツやアンサーフォーラムにアクセスする。
カート

カートには何も入っていません。

当社のショップを閲覧する

手順 5 への変更

- Justin Coganによって編集

承認済みの編集 : Justin Cogan

削除
追加
変更なし

手順ライン

[* black] To access and remove the forthfourth and final screw attaching the hood ofhood, the printer, the facepanel for the power button needs to firstmust be removed as follows:
[* red] Reach into the mouth of the printer and press on the small clip behind the power button. This will enableallows the facepanel of the power button to be removed.
[* icon_note] A picture of the power button panel removed is provided to show the location of the clip that needs to be pressed.
[* black] After pressing the clip, pull out the face of the power button:button panel by pulling from right side to left side to left.
[* black] To access and remove the forthfourth and final screw attaching the hood ofhood, the printer, the facepanel for the power button needs to firstmust be removed as follows:
[* red] Reach into the mouth of the printer and press on the small clip behind the power button. This will enableallows the facepanel of the power button to be removed.
[* icon_note] A picture of the power button panel removed is provided to show the location of the clip that needs to be pressed.
[* black] After pressing the clip, pull out the face of the power button:button panel by pulling from right side to left side to left.