メインコンテンツにスキップ

手順 5 への変更

- Joseph Camilleriによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* black] To access and remove the final screw attaching the hood of the printer, the face for the power button needs to first be removed.removed as follows:
[* blackyellow] Reach in tointo the mouth of the printer and press on the small clip behind the power button. This will enable the face of the power button to be removed.
[* blackicon_note] A picture of the power button removed is provided to show the location of the clip that needs to be pressed.
[* black] To access and remove the final screw attaching the hood of the printer, the face for the power button needs to first be removed.removed as follows:
[* blackyellow] Reach in tointo the mouth of the printer and press on the small clip behind the power button. This will enable the face of the power button to be removed.
[* blackicon_note] A picture of the power button removed is provided to show the location of the clip that needs to be pressed.
[* black] After pressing the clip, pull out the face of the power button: right side to left side.

画像2

古いバージョン

新しいバージョン