メインコンテンツにスキップ

手順 5 への変更

- Andrew Bookholtによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* icon_caution] Before attempting this step, we recommend laying your iMac stand-side down on a table to avoid the display falling down.
[* red] Remove the eight T10T8 Torx screws securing the display assembly to the rear case.
[* red] Remove the eight T10T8 Torx screws securing the display assembly to the rear case.
[* icon_note] It is helpful to use a thin magnetized screwdriver to remove these screws.