メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順1に変更

Blake Ehlersさんによる編集

承認済みの編集 : Blake Ehlers

変更なし

手順ライン

[* red] Locate the four 8.1mm PH0PH00 screws on the corners of the GoPro and unscrew themthem using the phillips screwdriver.
[* red] Locate the four 8.1mm PH0PH00 screws on the corners of the GoPro and unscrew themthem using the phillips screwdriver.
[* black] Gently remove the motherboard by using a plastic opening tool to pry it out of the housing.
[* icon_caution] Be careful not to damage the ribbon cable connected to the GoPro housing and motherboard.