手順1に変更
Patrick Cook — さんによる編集
承認済みの編集 : Patrick Cook
- 前
- 後
- 変更なし
手順ライン
[* black] Locate the four 8.1mm PH0 screws on the corners of the GoPro and |
[* black] Locate the four 8.1mm PH0 screws on the corners of the GoPro and |
[* black] Gently remove the motherboard by using a plastic opening tool to pry it out of the housing. |
[* icon_caution] Be careful not to damage the ribbon cable connected to the GoPro housing and motherboard. |
画像1
以前の画像はありません
追加
画像2
以前の画像はありません
追加
画像3
以前の画像はありません
追加