メインコンテンツにスキップ

Fix Your Stuff

Right to Repair

Parts & Tools

手順3に変更

Jeffrey J O'Dellさんによる編集

承認済みの編集 : Jeffrey J O'Dell

削除済み
追加
変更なし

手順ライン

[* black] With the screws removed,Next the wires are now able to come off. The wires are connected in two different ways.
[* black] With the screws removed,Next the wires are now able to come off. The wires are connected in two different ways.
[* red] The RED arrows indicate a small hinge locking the wire in. To remove the wire, follow the same steps taken to remove the wire in the prior steps.
[* orange] The ORANGE markers indicate that you need to lift the wire up and off of the motherboard. Using the opening tool, follow the same steps used to remove the swivel screen wire.
[* black] For the hinged wiresred] Next it is recommended that you use tweezers to carefully remove the wireall hinged wires as showndemonstrated by the RED arrow on the second image. You must carefully remove them by pulling them straight out of the socket they're seated inimage in this step.
[* black] For the hinged wiresred] Next it is recommended that you use tweezers to carefully remove the wireall hinged wires as showndemonstrated by the RED arrow on the second image. You must carefully remove them by pulling them straight out of the socket they're seated inimage in this step.
[* icon_caution] It is crucial that you move slowly and carefully! If one of the wires gets damaged, the camera might not work properly after reassembly.
[* icon_caution] You must carefully remove these wires by pulling them straight out of the socket they're seated in.