メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順3に変更

Alejandro Cabreraさんによる編集

承認済みの編集 : Alejandro Cabrera

削除済み
追加
変更なし

手順ライン

[* black] With the screws removedremoved, the wires are now able to come off. The wires are connected in two different ways.
[* black

[* red
] The red markersRED arrows indicate a small hinge locking the wire in, to remove the wire follow the same steps to remove the wire beforein the screw.
[* black
prior steps.
[* orange
] The orangeORANGE markers indicate that you need to lift the wire up and off of the motherboard. Using the prying tool follow the same steps used to remove the swivel screen wire.
[* black] For the hinged wires it is recommended that you use tweezers to carefully remove the wirewire as shown by the RED arrow on the second image. You must carefully remove them by pulling them straight out of the socket they rethey're seated in.
[* icon_caution] It is crucial that you move slowly and carefully.carefully! If one of the wires gets damaged it willdamaged, the camera might not work properly after reassembling the camerareassembly.
[* black] With the screws removedremoved, the wires are now able to come off. The wires are connected in two different ways.
[* black

[* red
] The red markersRED arrows indicate a small hinge locking the wire in, to remove the wire follow the same steps to remove the wire beforein the screw.
[* black
prior steps.
[* orange
] The orangeORANGE markers indicate that you need to lift the wire up and off of the motherboard. Using the prying tool follow the same steps used to remove the swivel screen wire.
[* black] For the hinged wires it is recommended that you use tweezers to carefully remove the wirewire as shown by the RED arrow on the second image. You must carefully remove them by pulling them straight out of the socket they rethey're seated in.
[* icon_caution] It is crucial that you move slowly and carefully.carefully! If one of the wires gets damaged it willdamaged, the camera might not work properly after reassembling the camerareassembly.