メインコンテンツにスキップ

Fix Your Stuff

Right to Repair

Parts & Tools

手順3に変更

Tyler Vaalさんによる編集

承認済みの編集 : Tyler Vaal

削除済み
追加
変更なし

手順ライン

[* black] With the screws removed the wires are now able to come off. The wires are connected in two different ways.
[* black] The red markers indicate a small hinge locking the wire in, to remove the wire follow the same steps to remove the wire before the screw.
[* black] The orange markers indicate that you need to lift the wire up and off of the motherboard. Using the prying tool follow the same steps used to remove the swivel screen wire.
[* black] For the hinged wires it is recommended that you use tweezers to carefully remove the wire. You must carefully remove them by pulling them straight out of the socket they re seated in.
[* icon_caution] It is crucial that you move slowly and carefully. If one of the wires gets damaged it will not work after reassembling the camera.

画像1

以前の画像はありません

追加

画像2

以前の画像はありません

追加