メインコンテンツにスキップ

手順 4 への変更

- Joseph Larwaによって編集

承認済みの編集 : Joseph Larwa

削除
追加
変更なし

手順ライン

[* black] Lift the front part of shell up, assuring not to pull too hard due a spring that is connect to the shell and the inside of the camera.
[* black] Carefully, using a screwdriver, remove the spring from the inside component of the camera.
[* black] At this point you should have the shell removed completely. Congratulations! Repeat the steps backwards to get the shell back on.