メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順8に変更

johnsawyercjsさんによる編集

承認済みの編集 : Jake Devincenzi

削除済み
追加
変更なし

手順ライン

[* yellow] While holding up the upper case, pull up the black tab of the silver cable away from its connector.
[* icon_note] If there is no black tab, you can also use a spudger to gently pry the connector from its housing. This connector is tall, so be sure to pry straight up.
[* icon_note] If you happen to break your upper case cable when removing the upper case, we stock the [product|IF186-092|cable] individually and we have a [guide|4660|guide] that makes replacing it easy.
[* icon_note] Upon reassembly, there are 4 grey plastic clips on the optical drive side of the keyboardkeyboard (refer to picture). They must be installed in their slots for the keyboard to snap in properly.
[* icon_note] Upon reassembly, there are 4 grey plastic clips on the optical drive side of the keyboardkeyboard (refer to picture). They must be installed in their slots for the keyboard to snap in properly.

画像2

以前の画像はありません

追加