メインコンテンツにスキップ

手順7に変更

S van Damさんによる編集

編集が拒否されました。 : David Hodson

変更なし

手順ライン

-[* icon_caution] There's a trackpad and keyboard ribbon connecting the upper case to the logic board, so don't pull the upper case off entirely just yet.
+[* icon_caution] There's a trackpad and keyboard ribbon connecting from the inside of the upper case to the logic board, so don't pull the upper case off entirely just yet.
[* black] Starting near the display and working around to the front of the computer, pry up on the upper case. A [product|IF145-000|plastic opening tool] or a medium hard guitar pick may help you to do this.
-[* icon_note] The upper case is likely to stick at the connection above the optical drive. If this is the case, first free all other sides, then proceed to pull upward on the upper case from either side of the optical drive opening.
-[* icon_note] If you stand the base on end to get a better look you may displace the total of 4 grey plastic bits that hold the keyboard in place. Don't panic. They slide into slots at the top right-most edge near the CD drive.
+[* icon_note] The upper case is likely to stick at the disc drive opening above the optical drive. First free all other sides, then proceed to pull upward a few millimeter on the upper case from all the other sides of the Mac.
+[* icon_note] Slide the upper case to the left, then pull it father upwards. If you pull it upwards without sliding to the left side of the Mac you have a big chance to ruin the right side frame!
+[* black] If you stand the base on end to get a better look you may displace the total of 4 grey plastic bits that hold the keyboard in place. Don't panic. They slide into slots at the top right-most edge near the optical disc drive.