メインコンテンツにスキップ

手順7に変更

jehさんによる編集

承認の保留中

変更なし

手順ライン

[* icon_caution] There's a trackpad and keyboard ribbon connecting the upper case to the logic board, so don't pull the upper case off entirely just yet.
[* black] Starting near the display and working around to the front of the computer, pry up on the upper case. A [product|IF145-000|plastic opening tool] or a medium hard guitar pick may help you to do this.
-[* icon_note] The upper case is likely to stick at the connection above the optical drive. If this is the case, first free all other sides, then proceed to pull upward on the upper case from either side of the optical drive opening.
+[* icon_note] The upper case is likely to stick at the connection above the optical drive. If this is the case, first free all other areas. Then slide the upper case to the left rather than pulling it upward. You will need to raise the left side of the upper case slightly above the lower case to provide clearance to do this.