メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順7に変更

Andyさんによる編集

承認の保留中

削除済み
追加
変更なし

手順ライン

[* icon_caution] There's a trackpad and keyboard ribbon connecting the upper case to the logic board, so don't pull the upper case off entirely just yet.
[* black] Starting near the display and working around to the front of the computer, pry up on the upper case.
[* icon_note] The upper case is likely to stick at the connection above the optical drive. If this is the case first free all other sides, then proceed to pull upward on the upper case from either side of the optical drive opening.
[* black] When doing reverse step .. ensure the clips above the optical drive are on the base section. if on the underside of the keyboard use spudger to remove then and attach back on base. they will slide in easily otherwise they will break if you try to force them in..