メインコンテンツにスキップ

手順2に変更

simoneさんによる編集

承認の保留中

変更なし

手順ライン

[* black] Remove the following 3 screws from the rear wall of the battery compartment:
- [* red] One 3 mm Phillips #0. (Head: 2.75 mm. dia.)
- [* orange] Two 4 mm Phillips #0 on the either side. (Head: 2.75mm dia.)
+ [* red] One 3 mm Phillips #00. (Head: 2.75 mm. dia.)
+ [* orange] Two 4 mm Phillips #00 on the either side. (Head: 2.75mm dia.)