メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順1に変更

Kelvinさんによる編集

承認の保留中

削除済み
追加
変更なし

手順ライン

[* black] Remove the following 3 screws:
[* red] One 11 mm PhillipsPhillips#00 in the middle of the case. (Head: 5mm dia. x .75mm thick)
[* orange] Two 14.5 mm Phillips #00 (Head: 5mm dia. x .75mm thick)
[* red] One 11 mm PhillipsPhillips#00 in the middle of the case. (Head: 5mm dia. x .75mm thick)
[* orange] Two 14.5 mm Phillips #00 (Head: 5mm dia. x .75mm thick)
[* icon_note] If the screws stick in the case, you can use a magnetized screwdriver to draw them out.
[* icon_reminder] The shorter of the three screws goes in the middle.