メインコンテンツにスキップ

手順1に変更

Chris Hoffmanさんによる編集

承認の保留中

変更なし

手順ライン

[* black] Remove the following 3 screws:
- [* red] One 11 mm Phillips in the middle of the case.
- [* orange] Two 14.5 mm Phillips.
+ [* red] One 11 mm Phillips in the middle of the case. (Head: 5mm dia. x .75mm thick)
+ [* orange] Two 14.5 mm Phillips (Head: 5mm dia. x .75mm thick)
[* icon_note] If the screws stick in the case, you can use a magnetized screwdriver to draw them out.
[* icon_reminder] The shorter of the three screws goes in the middle.