メインコンテンツにスキップ

手順 1 への変更

- Geoff Wackerによって編集

承認済みの編集 : Geoff Wacker

削除
追加
変更なし

手順ライン

[* red] Gently wedge the plastic opening tool under the ribbons where each of the two cables are connected, and gently lift up to detach the cable. This will allow you to remove the motherboard.
[* icon_caution] The rear-facing camera may be held down to the frame with two sided tape. Try to move the camera with the spudger prior to lifting the motherboard If it does not budge, use the same tool to pry it from the frame to avoid damaging the connector cable in the next step.