メインコンテンツにスキップ

手順 1 への変更

- carolinavindによって編集

承認済みの編集 : carolinavind

削除
追加
変更なし

手順ライン

[* black] TakeGently wedge the plastic opening tool and gently wedge it under the ribbon where the ribbon cable is connected.
[* black] Gently
connected, and gently lift up to disconnectdetach the ribbon cable.
[* black] Repeat on the second ribbon cableuntil both cables are disconnected.
[* black] TakeGently wedge the plastic opening tool and gently wedge it under the ribbon where the ribbon cable is connected.
[* black] Gently
connected, and gently lift up to disconnectdetach the ribbon cable.
[* black] Repeat on the second ribbon cableuntil both cables are disconnected.

画像1

以前の画像はありません

追加

画像2

以前の画像はありません

追加