メインコンテンツにスキップ

手順11に変更

Andrew Bookholtさんによる編集

承認の保留中

変更なし

手順ライン

[* black] After popping off a few EMI shields, we get a good look at the ICs on the logic board. They include:
[*
red] Broadcom BCM5973KFBGH Microcontroller used for touchscreen
[*

[*
orange] Broadcom BCM5974 CKFBGH capacitative touchscreen controller
[* black

[* icon_note
] This is the same combination as the original iPad - nothing new here!
[* black] After popping off a few EMI shields, we get a good look at the ICs on the logic board. They include:
[*
red] Broadcom BCM5973KFBGH Microcontroller used for touchscreen
[*

[*
orange] Broadcom BCM5974 CKFBGH capacitative touchscreen controller
[* black

[* icon_note
] This is the same combination as the original iPad - nothing new here!
[* black] Interestingly, the Wi-Fi board is attached to the logic board under one of the EMI shields. It can be easily pried off its socket.