メインコンテンツにスキップ

手順12に変更

Matt Bryanさんによる編集

承認済みの編集 : Matt Bryan

変更なし

手順ライン

[* black] Adjust the tension in the springs in the back of the guitar by using your Phillips head screwdriver to tighten or loosen the screws pulling on the springs.
[* black] Adjust the tension in the springs in the back of the guitar by using your Phillips head screwdriver to tighten or loosen the screws pulling on the springs.
[* icon_caution] It shouldn't take too much to adjust the tension, maybe half a turn or so for each screw.
[* icon_caution] Be absolutely sure to turn both screws (if more than one exist) the same amount.