修理を始めるには コミュニティ ストア

手順3に変更

- Alex Giannousisによって編集

承認済みの編集 : Alex Giannousis

前
後
変更なし

手順ライン

[* red] Using the 1.5mm hex screwdriver, remove the four screws from the rear of the case.
-[* orange] Remove the screw on the bottom of the case.
-[* icon_note] Again, recall which screws go where. The bottom screw and the top-right screw are both .15". The two bottom-right screws are both .4".
- [* icon_note] The top-middle screw is .15" but has a different size thread and a blue mark.
+[* orange] Remove the screw from the bottom of the case.
+ [* icon_note] The bottom screw and the top-right screw are both .15". The two bottom-right screws are both .4".
+ [* icon_note] The top-middle screw is also .15" but has a different size thread and a blue mark.