手順3に変更
- Alex Giannousisによって編集
承認済みの編集 : Alex Giannousis
- 前
- 後
- 変更なし
手順ライン
| - | [* red] Using the 1. |
|---|---|
| - | [* orange] |
| + | [* red] Using the 1.5mm hex screwdriver, remove the four screws from the rear of the case. |
| + | [* orange] Remove the screw on the bottom of the case. |
| [* icon_reminder] Again, recall which screws go where. The bottom screw and the top-right screw are both .15". The two bottom-right screws are both .4". | |
| [* icon_note] The top-middle screw is .15" but has a different size thread and a blue mark. |