手順3に変更
- Alex Giannousisによって編集
承認済みの編集 : Alex Giannousis
- 前
- 後
- 変更なし
手順ライン
| [* red] Using the 1.5 mm hex screwdriver, remove the four screws from the rear of the case. | |
| [* orange] Also remove the screw on the bottom of the case. | |
| - | [* |
| + | [* icon_note] Again, recall which screws go where. The bottom screw and the top-right screw are both .15". The two bottom-right screws are both .4". ***The top-middle screw is .15" but has a different size thread and a blue mark. *** |