手順2に変更
- Alex Giannousisによって編集
承認済みの編集 : Alex Giannousis
- 前
- 後
- 変更なし
手順ライン
| - | [* red] Using the 1. |
|---|---|
| + | [* red] Using the 1.5mm hex screwdriver, remove the screws from the end cap. |
| [* icon_note] Be sure to remember the location of each screw. The top screw is about .4" long, while the bottom three are about .15". | |
| [* black] Remove the end cap. |