手順2に変更
- Alex Giannousisによって編集
承認済みの編集 : Alex Giannousis
- 前
- 後
- 変更なし
手順ライン
| [* red] Using the 1.5 mm hex screwdriver, remove the screws from the end cap. | |
| - | [* |
| + | [* icon_note] ***Be sure to remember the location of each screw.*** In this step, the top screw is about .4" long, while the bottom three are about .15" |
| [* black] Remove the end cap. |