メインコンテンツにスキップ

手順 7 への変更

- Luke Soulesによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* black] Remove the following 16 screws, moving cables as necessary:
[* red] One 4.4 mm black Phillips screw to the right of the RAM slot.
[* orange] Nine 4.7 mm silver T6 Torx screws securing the logic board to the lower case.
[* yellow] One 6.2 mm black T6 Torx screw on the right side of the left fan.
[* green] Five 9.4 mm silver T6 Torx screws securing the left and right fans.