メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順5に変更

Tom Brandoliniさんによる編集

承認済みの編集 : Jake Devincenzi

変更なし

手順ライン

[* black] Use the edge of a plastic opening tool to pry the cellular antenna cable up from its socket on the logic board.
[* black] De-route the cellular antenna cable out from under the metal fingers attached to the logic board.
[* icon_caution] When reconnecting the antenna wire be VERY certain that the round connector at the end of the wire is centered on its mating half on the motherboard before applying pressure. Failure to do so will likely destroy both halves of the connector.