メインコンテンツにスキップ

手順 3 への変更

- Rachelによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* black] OnHold the camera right side oppositeup with the rubber cover, openLCD screen facing you. Open the battery on the right side of the camera casing by pushing slightly in the direction of the arrow.
[* red] Note: youYou may see a memory card. If so, remove the card by pushing down on it and it will come loose so you can gently pull it out.
[* black] UsingUse the Phillips head screwdriver, rotating counterclockwise, remove the two screws on either side of the memory card, and set themcard. Set the screws aside.
[* black] OnHold the camera right side oppositeup with the rubber cover, openLCD screen facing you. Open the battery on the right side of the camera casing by pushing slightly in the direction of the arrow.
[* red] Note: youYou may see a memory card. If so, remove the card by pushing down on it and it will come loose so you can gently pull it out.
[* black] UsingUse the Phillips head screwdriver, rotating counterclockwise, remove the two screws on either side of the memory card, and set themcard. Set the screws aside.