メインコンテンツにスキップ

手順 3 への変更

- Rachelによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* black] OpenOn the side parallel to the rubber cover, open the battery covercasing by sliding itpushing slightly in the direction of thethe arrow.
[* red] RemoveNote: you may see a memory card. If so, remove the card by pushing down on it until you hear a click, and it will come loose so you can gently pull it out.
[* black] Using the Phillips head screwdriver, remove
the two (3mm) screws next toon either side of the memory card slotcard, and set them aside.
[* black] OpenOn the side parallel to the rubber cover, open the battery covercasing by sliding itpushing slightly in the direction of thethe arrow.
[* red] RemoveNote: you may see a memory card. If so, remove the card by pushing down on it until you hear a click, and it will come loose so you can gently pull it out.
[* black] Using the Phillips head screwdriver, remove
the two (3mm) screws next toon either side of the memory card slotcard, and set them aside.