メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

手順5に変更

Andrew Optimus Goldheartさんによる編集

承認済みの編集 : Andrew Optimus Goldheart

変更なし

手順ライン

[* black] We turn our attention back to what we thought was a solid top, it turns out this was the way in all along.
[* icon_note] We really wish this thing came with a repair manual—this cap ''should'' have been the first to go.
[* black] We finally pop the top off this can ~~of worms~~, and the first component we spy is the famed congestion-sensing antenna.
[* black] We can't quite remove it yet, so leaving that to dangle gently to the side exposes
the LED board with some control hardware:
[* red] National Semiconductor [http://datasheet.octopart.com/LP5523TM/NOPB-National-Semiconductor-datasheet-10100337.pdf|LP5523|new_window=true] Programmable 9-Outputprogrammable 9-output LED Driverdriver
[* black] We finally pop the top off this can ~~of worms~~, and the first component we spy is the famed congestion-sensing antenna.
[* black] We can't quite remove it yet, so leaving that to dangle gently to the side exposes
the LED board with some control hardware:
[* red] National Semiconductor [http://datasheet.octopart.com/LP5523TM/NOPB-National-Semiconductor-datasheet-10100337.pdf|LP5523|new_window=true] Programmable 9-Outputprogrammable 9-output LED Driverdriver
[* orange] Ambient light sensor
[* black] Stacked beneath the light ring, we find the highly anticipated congestion-sensing antenna and radio. But we can't get it out just yet...

画像2

古いバージョン

新しいバージョン

画像3

古いバージョン

新しいバージョン