メインコンテンツにスキップ

手順12に変更

Jack Freemanさんによる編集

承認済みの編集 : Justin Ogihara

変更なし

手順ライン

[title] removing the screen
-[* black] before we open up the case , we will remove the screen.
-[* black] remove all black plastick stickers to reveal the hidden screws.
-[* black] remove the screws and pry open the case around the screen.
-[* icon_caution] be carefull cause there is adhesive under te cover. just pry and slide with your isesamo and you will hear clicks.
-[* black] after that you will see the screen. remove the cable from the webcam module.
-[* black] remove the screws at the ( both sides) side of the screen ( tiny screws in the metal frame around the screen)
+[* red] Remove all black plastic stickers to reveal the hidden screws.
+[* red] Use Phillips #000 Screwdriver to remove the hidden screws.
+[* icon_caution] Carefully slide your prybar under the edge and gently pry around the perimeter.
+[* orange] Remove the cable from the webcam module
+[* yellow] Remove the screws that hold the screen to the inner frame.
+ [* icon_caution] Apply gentle pressure when undoing the screws to preserve the condition of screw heads for future repairs or servicing.

画像3

古いバージョン

新しいバージョン