メインコンテンツにスキップ

手順5に変更

Nickさんによる編集

承認済みの編集 : Nick

変更なし

手順ライン

[title] Adjust the motor trimpot
-[* icon_caution] ***''Only adjust it enough to reliably read games and music CDs again. If overdone, the laser can physically "burn" your games or the laser will burn out!''***
+[* icon_caution] ***''Only adjust it enough to reliably read games and music CDs again. If overdone, the laser can physically "burn" your games, or kill the laser!''***
[* icon_note] ***''Consider anything less then a 80-90% read rate a failure. These are hard to reliably recover.''***
[* black] ***''Before starting, mark the original adjustment point and write down the factory setting as tested.''*** It will be difficult to take it back to stock without this information.
[* black] Adjust the trimpot incrementally using a ***''Phillips PH1 or other compatible bit.''*** Do this until the laser is reliable and consistently reads games. ***''Test the system to see if it is satisfactory.''***