メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

手順3に変更

Troy Pozirekidesさんによる編集

承認の保留中

変更なし

手順ライン

[* black] Disconnect the eight indicated connectors by placing a spudger beneath each cable and lifting up. These connectors have two parts, you need to make sure that you pry up the TOP PIECE ONLY, not the bottom part that is soldered onto the board.
[* black] Disconnect the eight indicated connectors by placing a spudger beneath each cable and lifting up. These connectors have two parts, you need to make sure that you pry up the TOP PIECE ONLY, not the bottom part that is soldered onto the board.