メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

手順2に変更

Walter Galanさんによる編集

承認の保留中

変更なし

手順ライン

[* black] Use the flat end of a spudger to gently push the power cable from its socket.
[* icon_caution] Be sure you are pushing on the cable, '''not''' the socket itself.
[* icon_note] It is recommended to push the connector from both sides in a side-by-side rocking motion to dislodge it from its recesssocket.
[* icon_note] It is recommended to push the connector from both sides in a side-by-side rocking motion to dislodge it from its recesssocket.
[* black] Pull the power ribbon cable out of its socket.