Nexus S Teardown手順の履歴

この手順に変更

2011年11月28日 - Brockによって編集

: 前
: 後
: 変更なし

手順ライン

+	[* black] There are two push connectors that need to be pryed off wit a case opener tool , one at the bottom and one wide one at the top left side , be careful not to rip them , the round silver disk is held in by double sided tape , pry it up with a flat blade screwdriver , it will stick back down on reassembly , the earpiece speaker will come out it is held in by it's rubber surrounding , again be carefull not to rip the ribbon wires

[* black] There are two push connectors that need to be pryed off wit a case opener tool , one at the bottom and one wide one at the top left side , be careful not to rip them , the round silver disk is held in by double sided tape , pry it up with a flat blade screwdriver , it will stick back down on reassembly , the earpiece speaker will come out it is held in by it's rubber surrounding , again be carefull not to rip the ribbon wires