メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順6に変更

decrodedさんによる編集

承認の保留中

変更なし

手順ライン

[* red] Taking out the motherboard requires removing three Phillips screws and disconnecting the display and keypad cables.
[* black] The display cable is near the upper left edge of the battery gap. When you remove the motherboard, make sure it doesn't get caught on this connector. As you lift up the motherboard, there is
a few cables here and therehole in it through which you can slide the display connector.
[* black] The keypad cable is at the bottom of the battery gap
.
[* red] Taking out the motherboard requires removing three Phillips screws and disconnecting the display and keypad cables.
[* black] The display cable is near the upper left edge of the battery gap. When you remove the motherboard, make sure it doesn't get caught on this connector. As you lift up the motherboard, there is
a few cables here and therehole in it through which you can slide the display connector.
[* black] The keypad cable is at the bottom of the battery gap
.
[* icon_note] The design of the motherboard is peculiar to us. It is designed such that its inner perimeter encloses the battery. We've seen oddly-shaped PCBs before, but rarely do they have giant holes in the middle of them.