手順6に変更
Andrew Bookholt — さんによる編集
- 前
- 後
- 変更なし
手順ライン
| [* black] Insert a spudger just to the right of the hinge opening on the top edge of the display between the front display bezel and the plastic strip attached to the rear bezel. |
| [* black] Pry the rear bezel away from the front bezel along the top right half of the display. |
| [* icon_note] To release the clips in the far left and right corners of the display, it may be necessary to run a spudger parallel to the face of the display along the top edge of the front display bezel and force it into the corners to pop the rear bezel off. |
画像1
以前の画像はありません
追加
画像2
以前の画像はありません
追加