手順8に変更
- Mani Nilavanによって編集
承認済みの編集 : Mani Nilavan
- 前
- 後
- 変更なし
手順ライン
| [* black] Use a pair of tweezers to lift the vibrator out of its crevace. | |
| [* icon_caution] Be gentle to avoid damaging the wires connecting it to the motherboard. | |
| [* black] Use a plastic opening tool or a spudger to gently pry the motherboard out of the case. Then, lift first from the top (near the camera). | |
| - | [* icon_note] The motherboard is secured with adhesive at the bottom (on the speaker assembly) so you may need to use an iOpener or heat gun to loosen the adhesive. Refer to the [guide|11677|iOpener guide|new_window=true] for further |
| + | [* icon_note] The motherboard is secured with adhesive at the bottom (on the speaker assembly) so you may need to use an iOpener or heat gun to loosen the adhesive. Refer to the [guide|11677|iOpener guide|new_window=true] for further info. |