手順2に変更
Joe Durand — さんによる編集
承認済みの編集 : Joe Durand
- 前
- 後
- 変更なし
手順ライン
| [* black] Push the motherboard towards the USB Charging Port, then lift the other side of the board up. |
| [* black] Slide the board out from under the white grooves near the USB Charging Port. |
| [* icon_note] If the motherboard won't budge, be sure that the square component on the bottom of the motherboard clears the edge of the speaker. |
| [* icon_caution] During reassembly, make sure the motherboard is fully installed and not sticking up past its original position, as this could damage the motherboard. |