修理を始めるには

修理する権利

ストア

手順2に変更

Joe Durand — さんによる編集

承認済みの編集 : Joe Durand

前
後
変更なし

手順ライン

[* black] Remove the motherboard from the casing.
[* red] Pushcasing by lifting the motherboard towardscorner of the USB Charging Port.
[* blue] Liftboard out of the opposite end the board updevice.
[* violetred] If the motherboard won't budge, be sure that the square component on the bottom of the motherboard clears the edge of the speaker.
[* black] Remove the motherboard from the casing.
[* red] Pushcasing by lifting the motherboard towardscorner of the USB Charging Port.
[* blue] Liftboard out of the opposite end the board updevice.
[* violetred] If the motherboard won't budge, be sure that the square component on the bottom of the motherboard clears the edge of the speaker.
[* icon_caution] During reassembly, make sure the motherboard is fully installed and not sticking up past its original position, as this could damage the motherboard.

画像1

古いバージョン

新しいバージョン

画像2

古いバージョン

新しいバージョン

画像3

削除済み