メインコンテンツにスキップ

Fix Your Stuff

Right to Repair

Parts & Tools

手順2に変更

Joe Durandさんによる編集

承認済みの編集 : Joe Durand

削除済み
追加
変更なし

手順ライン

[* black] PushRemove the motherboard from the casing.
[* red] Push
the motherboard towards the USB Charging Port, then liftPort.
[* blue] Lift
the other side ofopposite end the board up.
[* black] Slide the board out from under the white grooves near the USB Charging Port.
[* icon_note
violet] If the motherboard won't budge, be sure that the square component on the bottom of the motherboard clears the edge of the speaker.
[* black] PushRemove the motherboard from the casing.
[* red] Push
the motherboard towards the USB Charging Port, then liftPort.
[* blue] Lift
the other side ofopposite end the board up.
[* black] Slide the board out from under the white grooves near the USB Charging Port.
[* icon_note
violet] If the motherboard won't budge, be sure that the square component on the bottom of the motherboard clears the edge of the speaker.
[* icon_caution] During reassembly, make sure the motherboard is fully installed and not sticking up past its original position, as this could damage the motherboard.

画像1

古いバージョン

新しいバージョン

画像2

以前の画像はありません

追加

画像3

以前の画像はありません

追加