メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順1に変更

Scott Kaufmanさんによる編集

承認済みの編集 : Scott Kaufman

削除済み
追加
変更なし

手順ライン

[* red] Once you have the tire removed from the rim, place the rim on the truing stand and tighten the stand on the axle using the knob on the side of the stand to make sure the rim is secured on the stand.
[* red] Once you have the tire removed from the rim, place the rim on the truing stand and tighten the stand on the axle using the knob on the side of the stand to make sure the rim is secured on the stand.
[* orange] Raise the calipers on the stand so they are the same height as the rim. You can adjust the height of the calipers using knob on the base of the stand.