メインコンテンツにスキップ

手順3に変更

Kristen Gismondiさんによる編集

承認済みの編集 : Kristen Gismondi

変更なし

手順ライン

[* black] Flip the typewriter back to its original orientation, then rotate it so that the rear is facing towards you.
-[* red] Remove the three 19mm #8 Philips head screws near the bottom of the tan body panel using a #2 Phillips head screwdriver.
+[* red] Remove the three 19 mm screws near the bottom of the tan body panel using a Phillips #2 screwdriver.